How To Draw A Leaf In Photoshop

Allow's have a look at how to create a quick but constructive leafage brush for Photoshop completely from scratch! We will be learning how to create Photoshop brushes, how to install Photoshop brushes, and how to add a castor texture. Let's get started!

Follow along with us over on our Envato Tuts+ YouTube channel:

What Yous'll Demand

You'll need the following resources in order to consummate this project:

• Potted Plant
• Floating Maple Leaves
• Flowering Blitz

Notice more resource on Envato Elements!

1.How to Create Photoshop Foliage Brushes

First, permit's create a few dissimilar leaf brushes using a few different 3D renders!

Stride one

To first things off, permit'south create a basic leaf brush platonic for shrubs, bushes, or even ivy!

Find an image of some plant leaves—I will be using this 3D asset every bit it comes on a transparent background! Download it as a.PSD.

Step 2

Open upward the PSD file and delete the shadow layer.

Step 3

Become toImage > Adjustment > Hue/Saturationand bring theLightnessto-100.

Step 4

Mask or erase the stems and pot using either the Eraser Toolor Layer Masks.

Footstep 5

Cropthe paradigm down to its verbal pixel size. Get toEdit > Ascertain Brush Preset, proper name the brush "leaf", and then striking OK.

Step 6

Open up up aNew Document.

Select your new brush, but we aren't done all the same! We still accept to fix and salve all of its brush settings.

Open up theWindow > Brush Settingsand set them to the post-obit:

Brush Tip Shape

• Spacing 30%

Shape Dynamics

• Size Jitter: 60%
• Control: Pen Pressure (if applicable)
• Minimum Diameter: 5%

Handful

• Besprinkle: 140%
• Count: 3
• Counter Jitter: 20%
• Control: Pen Tilt (if applicative)

Stride 7

StrikingCreate New Brush,found on the bottom right-hand side of theCastor Settingsconsole, to save a new brush with the electric current settings.

Make sureInclude Tool Settingsis checked, unchecking all other boxes, and then hitOK.

Create a new layer and pigment with your new castor!

Footstep viii

I painted the bush-league beneath by first setting down a base of dark blue-green #20333d leaves, and then adding a slightly lighter ready of blue-green #304d4c leaves on top.

Next, I added an fifty-fifty lighter green #326c60, and a brilliant true green #73c75d.

Then finally, on top of all other leaves, I created a bright neon-green #a3df55 set of leaves.

I similar to paint each of them on their ain separate layers so I can hands add more than as I go!

Footstep 9

Create a quick shadow past duplicating all of the leaf layers, and then merge all of the duplicated layers together.

Go toImage > Aligning > Hue/Saturationand bring theLightnessto-100,changing the leaves to black.

And finally, using the Transform Tools to squish the image downwards into a shadow-similar shape.

Use a softEraser brush to fade out the ends of the shadow.

two. How to Create a Brush of Bravado Leaves

To create a set of loose, free-form leaves, we are going to first past repeating the get-go few steps of the previous brush!

Step 1

Notice an image of some maple leaves—I will exist using this 3D asset equally over again it comes on a transparent groundwork!

Download as a.PSD.

Step two

Open upward the PSD file.

Get toImage > Aligning > Hue/Saturationand fix theLightnessto-100.

Step 3

Cropthe image downwardly to its exact pixel size.

Become toEdit > Define Brush Preset, proper name the castor "leaf", and so hitOK.

Step 4

Open up aNew Document. Select your new brush, because information technology's time to set the brush settings!

OpenWindow > Castor Settingsand employ the post-obit settings:

Castor Tip Shape

• Spacing 45%

Shape Dynamics

• Size Jitter: 48%
• Control: Pen Pressure (if applicable)
• Minimum Bore: ten%
• Angle Jitter: 100%
• Roundness Jitter: nineteen%

Handful

• Scatter: 93%
• Count: 2
• Counter Jitter: 20%
• Control: Pen Tilt (if applicable)

Color Dynamics

• Hue Kitter: six%
• Effulgence Jitter: 18%

Step five

StrikingCreate New Brush,found on the bottom correct-hand side of theBrush Settingspanel. Make sureInclude Tool Settingsis checked, unchecking all other boxes, and then hitOK.

Create a new layer and paint with your new brush!

3. How to Create a Flower Photoshop Brush

Now, on to a flower castor!

Step one

I will exist using this flowering rush to create a meadowy flower brush.

Go ahead and repeat the outset 3 steps of the past few brushes!

Step 2

Open up up aNew Document. Select your new castor—time to ready the brush settings!

OpenWindow > Brush Settingsand utilise the following settings:

Brush Tip Shape

• Spacing 33%

Shape Dynamics

• Size Jitter: 32%
• Command: Pen Pressure (if applicative)
• Minimum Diameter: 9%
• Bending Jitter: 5%
• Roundness Jitter: 30%

Scattering

• Scatter: 20%
• Count: 2
• Counter Jitter: 20%
• Command: Pen Tilt (if applicable)

Color Dynamics

• Hue Kitter: 6%
• Brightness Jitter: xviii%

Step iii

HitCreate New Brush,found on the bottom right-hand side of theBrush Settingspanel. CheckInclude Tool Settings, unchecking all other boxes, and so hitOK.

Create a new layer and paint with your new brush!

four. How to Draw a Leafage Brush

Next, permit's look at how to quickly create a foliage brush in Photoshop completely from scratch. No extra images needed!

Footstep 1

Create a largeNew Document.Mine is4000 10 4000 px!

Step 2

Using a hard, round brush, paint two leaf-like shapes. Annotation that I said "leaf-like" every bit you don't demand to be Picasso here! Simply a general shape will work.

Step three

Copy the leaf-like layer and and then shrink and angle it, turning four leaves into eight. Bring downward theOpacity of the two leafage layers to around lxx%.

Pace iv

Indistinguishable the leaf-similar shape again, further shrinking information technology and placing it over the other leaves. Bring theOpacityback upwardly to100%.

Footstep five

Create a few random solid blackness blobs around the exterior of the leaves.

We are creating variation in the leaves, so make certain they are unlike shapes and sizes, only go along them paired for the near part!

Step 6

Repeat the above footstep one more fourth dimension, adding even smaller leaf-similar blobs. Cropthe image down to its exact pixel size.

Step vii

Go toEdit > Define Castor Preset, proper name your castor "Leaves", and hitOK.

Stride 8

Open upward a new canvas or image to paint on.

Select your"Leaves" castor from the brush menu, open theWindow > Brush Settings, and set the brush settings to what you lot see below.

Brush Tip Shape

• Spacing thirty%

Shape Dynamics

• Size Jitter: 61%
• Control: Pen Pressure level (if applicable)
• Minimum Diameter: 5%

Scattering

• Besprinkle: 142%
• Count: 3
• Counter Jitter: 20%
• Control: Pen Tilt (if applicative)

Color Dynamics

• Hue Kitter: 6%
• Brightness Jitter: 18%

Stride nine

HitCreate New Brush to save the current brush settings.

Remember to make sure to checkInclude Tool Settings, and uncheck all other boxes.

Again,create a new layer and pigment with your new castor!

v. How to Install Photoshop Brushes

Finally, let's learn how to install Photoshop brushes and take a expect at some of my favorite foliage brush resources!

Step ane

Starting time, select the brush you desire to download—I will be downloading these Elegant Floral Brushes for Photoshop.

One time downloaded, identify the.ABRfile somewhere on your computer. I recommend having a binder dedicated to storing all of your brushes!

Step two

Once extracted, open a Photoshop file and select theBrush Tool.

Click on your brushes, institute in the upper-left-hand toolbar. Choose theGear Iconin the upper right corner of the Brush panel.

ChooseImport Brushesand locate the new.ABRcastor file.

Select the new brush from theBrush paneland paint!

We've Done It!

And there yous have it! Creating your ain resources can seem similar a daunting task at first, simply putting together some elementary shapes can go you some big results in the end!

All the same, if you are similar me and aren't much of a digital painter—or just someone who needs some green only doesn't have the time to mitt-paint all those leaves themselves—accept a look at some of my favorite premade leaf resource!

Grass Photoshop Action

This Photoshop action will create a grass event in just a matter of seconds! It also includes a grass brush to perfect whatsoever blades of grass that might need a trim.

Elegant Floral Brushes for Photoshop

This brush pack contains 15 different Photoshop brushes of photo-realistic flowers and shrubs. Perfect for both realistic and surreal photo composites!

x Watercolor Leaf Branches Illustration Graphics

Here are ten watercolor foliage branch illustrations that will give your epitome a touch of watercolor. The best role? These images are a whopping 400 px in size, making them perfect for simply about any impress project.

Dark-green Leaves

Another pack of gorgeous illustrations to requite you lot that watercolor vibe. All of these leaves are hand-painted with plenty of brush texture!

Jump Leaves

Finally, this image pack contains vines, ferns, and larger blooms of leaves that are all inspired past bound and summer plants.

As always, continue experimenting with different techniques and practicing. Don't forget to post your version below, along with any questions, comments, or critiques!

Looking to acquire more? Why not check out the following tutorials:

Source: https://design.tutsplus.com/tutorials/how-to-create-a-leaf-brush-in-photoshop--cms-34289

Posted by: neffhuselan.blogspot.com

Share this post